Warehouse & industrial facility cleaning across Toronto and the GTA

Warehouse Cleaning Toronto

Warehouse cleaning Toronto and GTA operations book when dust starts landing on product, floor markings disappear under forklift grime, and the front office stops matching the pace of the operation behind it. We service warehouses, distribution centres, and light industrial facilities from our Concord office in the 400-corridor industrial belt, with WSIB-covered crews that work around live operations.

  • WSIB certified
  • $5M liability insured
  • Written scope before work
  • Same crew every time
Clean warehouse aisle with racking and machine-scrubbed concrete floor
400-corridor basedShort response times across the industrial belt.
30+Commercial buildings serviced monthly
WSIBClearance certificates before shift one
Zone-basedScopes priced by what actually gets serviced
No lock-inRecurring service without multi-year terms

Not a cosmetics problem

Dust is an operations problem

In a warehouse, dust is not about appearances. It settles on stored product and packaging, dulls safety-line markings, aggravates staff working full shifts in it, and shows up in every client audit and walkthrough. Concrete dust from the slab itself adds to what trucks, doors, and dock traffic bring in daily.

A warehouse also cannot stop for cleaning. Receiving keeps receiving. Pickers keep picking. That is why warehouse cleaning is a scheduling discipline as much as a cleaning one: crews that work zone by zone around your operation, on shifts that match yours, with the site rules followed and the paperwork done.

Zone by zone

What our warehouse and factory cleaning covers

Every scope is zone-based, so the price reflects what actually gets serviced. The factory cleaning we run for manufacturers follows the same structure, adapted to production schedules and site safety requirements.

Floor scrubbing

Machine scrubbing of warehouse concrete floors, aisle by aisle around racking.

Safety-line visibility

Walkway and safety-line markings maintained through regular floor care.

Racking dust control

Reachable levels dust-controlled on a schedule so product is protected.

High dusting

Beams, ledges, fixtures, and conduit cleaned with appropriate equipment.

Dock and receiving

Dock and receiving areas cleaned, where the outside comes in.

Washrooms and lockers

Serviced to a documented standard, checked on every visit.

Lunchrooms

Break areas staff actually want to sit in, not an afterthought.

Factory floor interior with production machinery and clean walkways

Site rules, followed

Working on a live industrial site

Industrial cleaning is different from office work and we staff it that way. Crews are briefed on your site rules before day one: PPE requirements, forklift traffic zones, sign-in procedures, lockout areas that are off limits. WSIB clearance and the $5M insurance certificate arrive before the first shift, unprompted, because your safety officer should not have to chase paperwork.

Scheduling flexes to the operation: between shifts, overnight, weekends, or a standing slot when volume is lowest. The scope defines which zones are serviced on which visits, so nothing depends on verbal handoffs between your team and ours. If your safety plan changes, the scope is updated with it, not left to catch up later.

Where we work

Based in the 400 corridor, where the warehouses are

Our office is at Steeles and the 400 corridor in Concord, inside the same industrial belt as most of the buildings we service. That means short response times for Vaughan, north Toronto, Mississauga, Brampton, and Markham facilities, and crews that are used to industrial sites, not office cleaners visiting one for the first time. We run 30+ commercial buildings monthly, and the industrial accounts stay because the crews show up on shift schedule, every time.

Book a walkthrough

The hardest-working surface

Floor programs for industrial concrete

Warehouse floors take the hardest use of any commercial surface: forklifts, pallet drag, salt, and spills. Regular machine scrubbing keeps dust down and markings visible. Sealed or polished concrete needs periodic renewal, and staging or showroom zones may warrant a higher finish.

Spacious modern warehouse interior with clean polished concrete floor

Getting started

How we start an industrial account

  1. 1

    Site walkthrough

    We walk the facility with your ops or facilities lead: zones, shift pattern, dust sources, problem areas, and the site rules our crew must follow.

  2. 2

    Written scope

    Zones, tasks, frequencies, and safety requirements on paper. Warehouse scopes are zone-based so the price reflects what actually gets serviced.

  3. 3

    Crews on your shift pattern

    Same crew, scheduled around the operation. Zone-by-zone service that never blocks a dock or an aisle at the wrong time.

  4. 4

    Logs for your audits

    Every visit documented: zones serviced, work done, issues flagged. When a client audit asks about facility upkeep, the record exists.

The accountability gap

Why facilities switch to Profound

Most warehouse managers who call us are not hiring a cleaner for the first time. They are replacing one that could not keep pace with shift changes, sent a different crew every visit, or left no record of what was actually done.

Crews that know industrial sites

Our people are used to forklift traffic, PPE requirements, and dock rules, not office cleaners learning a warehouse for the first time.

Zone-based scope in writing

What gets serviced, how often, and under what site rules is agreed before work starts. When the operation changes, the scope changes with it.

Proof after every visit

A completion log records which zones were serviced. Facility managers can check the record instead of chasing a verbal update.

Local response time

Our Concord office sits inside the same 400-corridor industrial belt as most of the buildings we service, not a dispatch from across the city.

Questions, answered plainly

Warehouse cleaning FAQ

Practical answers for warehouse and facility managers evaluating a cleaning partner.

What does warehouse cleaning include?

Warehouse cleaning covers machine scrubbing of concrete floors, dust control on racking and reachable surfaces, high dusting of beams and fixtures, dock and receiving areas, plus the human spaces: washrooms, lunchrooms, locker areas, and front offices. The exact zone list is defined in a written scope, because a 30,000 sq ft distribution centre and a light assembly plant need different visits.

How do you clean a warehouse without stopping operations?

By working zone by zone on a schedule built around the operation: between shifts, overnight, or during the lowest-volume window. Crews are briefed on forklift traffic zones and site rules, and each visit’s zones are agreed in advance so supervisors always know where the cleaners are.

How do you control dust on warehouse racking?

Reachable racking levels are dust-controlled on a rotation with equipment that captures dust rather than pushing it onto product below. Upper levels and beams are handled through scheduled high dusting. The rotation frequency depends on the dust load of the operation, which the walkthrough establishes.

How often should a warehouse floor be scrubbed?

High-traffic distribution floors typically need machine scrubbing weekly to keep dust down and safety lines visible, while lower-traffic facilities may hold their standard on bi-weekly or monthly cycles. Dock areas and main aisles usually need more frequent passes than storage perimeters.

Are your crews insured for industrial sites?

Yes. Crews carry WSIB coverage, the company holds $5M liability insurance, and clearance certificates are provided before the first shift. Crews follow site PPE requirements, sign-in procedures, and any zone restrictions in your safety plan.

Do you clean factories and production facilities too?

Yes. The factory cleaning we run for manufacturers covers the same structure as warehouse service, scheduled around production: floors, dust control, staff areas, washrooms, and offices. Production equipment itself stays under your team’s control; we clean the facility around it.

How is warehouse cleaning priced?

Warehouse cleaning is quoted after a site walkthrough, based on the zones you need serviced and how often. A distribution centre with daily dock traffic and a light assembly plant with a small office footprint price differently, because the written scope only covers what actually gets cleaned. There is no flat industry rate worth quoting without seeing the site.

Book a facility walkthrough

Get a warehouse cleaning quote

Tell us your facility size, shift pattern, dust sources, and problem zones. We walk the site, write the scope, and quote in 24 hours.

Based at 3100 Steeles Ave W, Suite 206A, Concord, ON L4K 3R1, in the 400-corridor industrial belt. Serving Toronto and the GTA.

+1 (647) 567-9992

Keep reading

Running shifts around the clock? A distribution centre schedules cleaning very differently from a storage warehouse: see cleaning a building that never stops.